flat belt

Our FBC flat belt conveyors are used to transport PCBs into or out of a reflow oven or cleaner (wash), or may be used for progressive assembly of sub-components..

The FBC models can be programmed for either progressive indexing or continuous flow, or may have other special functions built in. 

Both look across and look down sensing configurations are available. Full alert may also be programmed to notify operators when the belt is full and requires unloading.  A small roller (nose bar) may be used at the entrance or exit side to reduce gaps between process machines.  

Standard Features:

  • Motor Controller
  • Left to Right Process Flow, Front Fixed Rail
  • Variable belt speed( 50 ~ 200 mm/sec) Outside
  • 500 mm wide ESD Belt
  • E-Stop, On/Off
  • Small roller minimizes gaps (10 mm)
  • Roller wheels and leveling feet
  • Powder coated panels (PROMATION Off White)
  • 10 foot power cord (detachable)
  • No SMEMA
  • Pass Line Height (950 mm nominal +/- 30 mm)
  • 1M, 1.5M & 2M lengths
  • 110V Power Outlet / 15A standard circuit

General Specifications:

Pass Line Height:

Paint Color:

Flow Directions:

Fixed Rail:

PCB Thickness:

PCB clearance:

Below PCB clearance:

Electrical Outlet:

Air Connection:



Options Available:

  • Right to Left Process Flow
  • 600 mm wide belt
  • 900 mm nominal +/- 30 mm
  • Custom lengths available
  • 220V Power Outlet


950 mm nominal +/- 30 mm

EX8816S-SR-WH020KCC Off White

Left to Right or Right to Left

Front or Rear

0.5 ~ 5 mm

1.5” (40 mm)

1.5” (40 mm)

110 VAC / 50-60 Hz1 Phase 15 A

5 Bars / 71 PSI