Standard Features:

  • PLC Controller (Panasonic)
  • Left to Right Process Flow, Front Fixed Rail
  • All belt type buffering solution – Magnetic Drive
  • 3mm edge contact
  • Precision indexing function 1 or 2 pitch select
  • In feed conveyor  side
  • Automatic Width Adjustment
  • E-Stop, On/Off, Light Tower
  • Roller wheels and leveling feet
  • Powder coated panels (PROMATION Off White)
  • 10 foot power cord (detachable)
  • Two SMEMA cables
  • Pass Line Height (950 mm nominal +/- 30 mm)
  • 72 PSI Air (5 Bars)
  • 110V Power Outlet / 15A standard circuit
  • Full safety covers
  • PCB Top / Bottom side clearance depends on slot selection *
  • PCB weight limit 1 kilogram per PCB slot
  • Touch Panel
  • LIFO / FIFO / PASS functions /

 

Multi-Functional buffer system 
ESB-300C

Our NRC Series of Multi-Functional buffer systems accept PASS & NG signals from the AOI System via SMEMA interface and sorts incoming PCBs accordingly. The system uses a 12 slot vertical buffer for suspect PCBs, while utilizing a lower pass-through conveyor (lower level) for GOOD PCBs. Suspect PCBs are carried to an upper conveyor level for Review/Rework and can effortlessly be reintroduced into the production line should the suspect PCB be a “false failure”. 

 

Available Options:

  • Out feed conveyor  side
  • 10 slots @ 35 mm spacing (pitch)
  • 15 Slots @ 22 mm spacing (pitch)
  • 20 Slots @ 17 mm spacing (pitch)
  • Cooling Fans on Conveyor section
  • 900 mm nominal +/- 30 mm
  • Right to Left process flow
  • 220V Power Outlet

 

Select No of PCBs to prohibit transfer into reflow from previous conveyor. (Note: requires Long SMEMA cable option)