The 9N393W Series of Hot Air Soldering Robots feature a robust heating system with a variety of heat focusing nozzles. The system generates a Heated Vortex of Nitrogen to create a localized convectional heat; allowing for localized reflow of solder paste in fine pitch and tight-to-reach applications. The heating system is capable of delivering and maintaining a set temperature with industry leading stability and accuracy. With solder paste applied to the soldering targets, the robot is intended to move to pre-programmed locations and apply a set amount of heat for a set amount of time.

All systems come standard with a 300W Power Supply capable of maintaining a temperature of up to 500°C, A variety of nozzles, color CCD "Witness Cameras" and light screen safety enclosures are optional.

Features:

Non-Contact Soldering Method (Hot Nitrogen)

Highly Stable Air Volume Control w/ Vortex Generator

Clean Process, No Need For Worrying About Soldering Debris

Very Low Oxidation Rate, Less Consumable Cost vs Soldering Tip On Hot Iron Soldering Systems.

Ideal For Reflowing Solder Paste

System specifications:

MOVEMENT RANGE:                                                       Variable (ranging 200mm x 200mm - 400mm x

                                                                                             400mm)depending upon robot platform size.

AIR VOLUME CONTROL RANGE:                                  0L/min - 4L/min

TEMPERATURE RANGE:                                        50°C-500°C

POWER SUPPLY:                                                             300W